Item: A4 or A5 corporate folder made from 350gsm uncoated FSC card with inner insert pockets front and back. 

To hold the event documentation for delegates

Size: A4: 300mm x 230mm (no gusset), to hold A4 size documents

Size: A5: 216mm x 164mm (no gusset), to hold A5 size documents

Please select your size preference at point of order using the drop down menu below.

Design: WTW Grey Matter with pattern, WTW logo to top right of cover and URL to rear. Flooded with WTW Ultraviolet Light to the inside.

Package: Supplied bulk packed. These folders are packed in boxes of 100 which ensure they are protected for shipping, please try to order in multiples of 100 where possible.

Pricing: Refers to 1 single folder

Availability: Made to Order, this item requires approx 10 working days production from point of order.

My Story: Manufactured in the UK using FSC certified stock, and batch marched with the FSC logo to the rear of the folder. Printed using vegetable based inks and with an uncoated finish (no laminate coating), these folders are 100% recyclable. 

End of Life: This folder can be placed into paper or card recycling schemes with no treatment or further action required by the user.

A4 Notepad with 5 Pages per pad and a card backing. Glued along top edge. 

Low number of pages per pad, specifically for Event use.

Size: 297mm x 210mm

Design: Printed WTW logo bottom right (Lines are also WTW Ultraviolet)

Package: Supplied bulk packed

Pricing: Refers to 1 single pad

Availability: Made to Order, this item requires approx 12-14 working days production from point of order.

My Story: Manufactured in the UK using FSC certified stock. Printed using vegetable based inks and with an uncoated finish (no laminate coating), these pads are 100% recyclable. 

End of Life: These pads can be placed into paper and card (the grey backing card) recycling schemes with no treatment or further action required by the user.

Item: The Recycled Aluminium Pen. Includes a barrel made with recycled aluminium accented by a renewable bamboo plunger. A gunmetal stainless steel clip and clear rPET recycled plastic surround. 

High-capacity refill in black ink (0.7 mm) with 1800m writing distance - for a longer lasting writing experience. 

Recycled symbol on the barrel, opposite from the clip, to highlight its innovative recycled aluminium barrel.

Size: 140mm x 10mm dia

Design: Grey body with WTW logo laser engraved to barrel

Package: Bulk packaged

Pricing: Refers to one pen

Availability: Made to Order, this item requires approx 15 working days production from point of order.

My Story: A premium feel metal pen created using recycled aluminium, rPET and stainless steel trim as well as a bamboo plunger. Materials that all lend themselves well to the Sustainable messaging. Aluminium is an easily recycled metal using a relatively low energy process compared to other metals and this pen can again be recycled after use. Bamboo and rPET is used in the small finishing on the pens clip/button section, replacing virgin plastic. The pens refill is rated to a writing distance of 1800 meters so the user can hold onto this pen for a long period of time. Item is engraved so no print inks are used in the branding. 

End of Life: An average pen refill will write for around 900-1000m, so we hope with a 1800m rated ink refill this pen will last much longer - but when it does reach its end of life, the components can be separated out and recycled or repurposed by the user.

• Aluminium - Can be reprocessed multiple times. Recycling aluminium uses only about 5% of the energy required for smelting, making it the metal with the highest recycling energy savings of any major material.
• Steel - The most recyclable material on the planet by weight (1085 million tonnes annually) - steel can be continually recycled.
• rPET (recycled PET) - Saves two-thirds of the energy usually required to produce virgin plastic. Recycling this again into can create containers, carpets, clothes, protective packaging, and other products indefinitely.
• Bamboo - A natural, sustainable material that breaks down in nature without dispersing contaminants.

• Ink refill* - placed into normal waste

*The ink refill for this pen can be replaced by the end user. It is a standard size and is available through various retail channels.

Item: This unique Eco ballpoint pen consists of at least 90% cellulose acetate, a renewable, bio-based material. 

Equipped with a replaceable quality Jogger soft refill with Black ink, enough to write for over 1400 metres. 

White smooth finish with Push Button.

Size: 145mm x 10mm

Design: WTW logo printed in WTW Ultraviolet to barrel

Package: Bulk packed

Pricing: per pen

Availability: Made to Order, this item requires approx 8-10 working days production from point of order.

My Story: The composition of Barrel, Clip and Push Button are all made from at least 90% cellulose acetate, a renewable and biodegradable material. Barrel and clip colour may vary slightly due to the nature of the material. Supplied with a refill that is rated for over 1400m so will keep going for months of use. Produced the EU, this is a sturdy and fully recyclable item. 

End of Life: When this pen reaches an unusable stage, the user can unscrew the Clip/Barrel section and remove the Metal Spring and Ink Refill. Then, use the Ink Refill as a tool to pop out the second spring mechanism in the Clip section, along with the Button and clear Spring Clasp. The four (4) white components can then be placed into standard plastics recycling, the two (2) Springs into Metals recycling - and the Ink Refill into standard waste (you could also cut this to place the used tube section into plastics, as this is ABS plastic). 

The user could also repurpose the pen:

1. The Ink Refill is a universal fit, so you could replace this component and the pen can then continue to be used. 
   
2. The Metal Springs can be lightly uncoiled and then repurposed to create cable-protectors (re-wound onto electronics cables to cover/protect the join section where Cable meets Connector)

Item: Prodir DS-7 model ball pen, in frosted Grey (fume) finish with Violet push button, chrome nose cone and a floating ball black ink refill.

Premium feel, Swiss made push button pen, now made from 50% Recycled plastic.

Size: 140mm x 12mm

Design: WTW logo in White to one position on Clip

Package: Supplied bulk packed

Pricing: Refers to one pen

Availability: Made to Order, this item requires approx 20-25 working days production from point of order.

My Story: Prodir now use 50% recycled plastic (ABS) for this pens body. The low-pollutant, lead-free ink refill is compliant with the REACH regulation (1907/2006) and contains no elements on the SVHC (Substances of Very High Concern) list or in its annexes. Supplied with a refill that is rated for over 2500m so will keep going for months of use. Produced in Switzerland by Prodir, a hugely reputable manufacturer who are SMETA certified and part of the AIM-Progress group. The factory in Switzerland uses 100% hydropower for all manufacturing. 

End of Life: When this pen reaches an unusable stage, if the user wishes to dispose of the pen they can unscrew the Nose Cone and remove the Metal Spring and Ink Refill. The plastic components can then be placed into standard plastics recycling, the Spring into metals recycling. The Ink Refill would need to go into standard waste. Prodir ink refills are actually available through retail channels, so the user could simply buy further refills and continue using the pen if they choose. Refills are a listed under the Prodir or Premec brand (as well as other generic manufacturers who make compatible sized refills)

Item: Soft-touch metal pen in Black with luxury tactile feel and contemporary gunmetal trim. 

Fitted with an Eversmooth elite German ink refill for a noticeably smoother writing experience. Supplied with black writing ink.

Size: 136mm x 10mm dia

Design: Mirror finish laser engraving of the WTW logo to the barrel 

Package: Bulk packaged

Pricing: Refers to one pen

Availability: Made to Order, this item requires approx 12 working days production from point of order.

My Story: Barrel and Trim made from Steel. The pens refill is rated to a writing distance of 1800 meters so the user can hold onto this pen for a long period of time. Item is engraved so no print inks are used in the branding. 

End of Life: An average pen refill will write for around 900-1000m, so we hope with a 1800m rated ink refill this pen will last much longer - but when it does reach its end of life the refill could be replaced by the user, or the pen could be separated (unscrew nose cone) into five (5) components:

1. Barrel (metal and plastic inner) - metals recycling 
2. Ink refill* - placed into normal waste
3. Spring - metals recycling
4. Nose cone - metals recycling
5. Button Link (small white plastic component) - Plastics recycling

*The ink refill for this pen can be replaced by the end user. It is a standard size and is available through various retail channels.

Pencil made from recycled paper with painted finish. Supplied sharpened, with Silver ferrule and white eraser.

Pencil is available in Black with white print OR Silver with print in WTW Ultraviolet - Please choose your preference at point of order using the drop-down selection. 

Size: Approx 19 cm in length

Design: WTW logo printed to barrel

Package: Bulk packaged

Pricing: Per pencil

Availability: Made to Order, this item requires approx 12 working days production from point of order.

My Story: Barrel of the pencil is made from Compacted recycled paper (pulp), housing the graphite. The ferrule is made from tin plated brass (recyclable). The eraser is synthetic rubber.

End of Life: Should this product reach a point where it is no longer usable, the item could be repurposed, composted or separated (Metal/Eraser/Pencil) and all components could then be easily recycled. 

Item: For printing Delegate names for events, supplied on A4 Sheet size, specifically for use on Local printers.

Sheet is perforated once down & 4 times across to give 10x Badge inserts, each H57 x W90mm. Single sheet to go into laser printer and then tear off to create 10 Badge inserts. 

To hold these Badge card inserts we supply the Badge card holder specifically sized for these inserts: Name Badge Card Holder

Usage: For printing Delegate names for events. Please Note: this item is the INSERTS only, you need to order the holders separately.

Size: 295mm x 210mm

Design: WTW in Ultraviolet in bottom right corner (only)

Package: Supplied as single sheet, bulk packed

Pricing: Refers to 1 single sheet (10 badge inserts)

Printing Template: This is available for download from this link: NameBadges-A4Sheet_v4.docx

If you are unable to see the Gridlines when viewing the templates in Microsoft Word then please refer to the following OS specific guides:

Windows: ViewGridlines-Windows.jpg

Mac OS: ViewGridlines-Mac.jpg

Availability: Made to Order, this item requires approx 10 working days production from point of order.

My Story: Manufactured in the UK using FSC certified stock. Printed using vegetable based inks and with an uncoated finish (no laminate coating), these inserts are 100% recyclable. 

End of Life: These inserts can be placed into paper recycling schemes with no treatment or further action required by the user.

Item: For printing Host names for events, supplied on A4 Sheet size, specifically for use on Local printers.

Sheet is perforated once down & 4 times across to give 10x Badge inserts, each H57 x W90mm. Single sheet to go into laser printer and then tear off to create 10 Badge inserts. 

To hold these Badge card inserts we supply the Badge card holder specifically sized for these inserts: Name Badge Card Holder

Usage: For printing Host names for events. Please Note: this item is the INSERTS only, you need to order the holders separately.

Size: 295mm x 210mm

Design: WTW Ultraviolet block at the bottom of each badge, WTW in white in bottom right corner.

Package: Supplied as single sheet, bulk packed

Pricing: Refers to 1 single sheet (10 badge inserts)

Printing Template: This is available for download from this link: NameBadges-A4Sheet_v4.docx

If you are unable to see the Gridlines when viewing the templates in Microsoft Word then please refer to the following OS specific guides:

Windows: ViewGridlines-Windows.jpg

Mac OS: ViewGridlines-Mac.jpg

Availability: Made to Order, this item requires approx 10 working days production from point of order

My Story: Manufactured in the UK using FSC certified stock. Printed using vegetable based inks and with an uncoated finish (no laminate coating), these inserts are 100% recyclable. 

End of Life: These inserts can be placed into paper recycling schemes with no treatment or further action required by the user.

Item: Clear acrylic badge card holder to hold the printable Name Badge inserts, with swing clip fastening (rotates through 360 degrees) AND safety pin option.

Please Note: this item is the HOLDER only, you need to order the inserts separately

Usage: These holders are specifically sized to hold the WTW inserts available here:

Delegate specific inserts

Host specific inserts

Size: 89mm x 58mm (+ clip 10mm approx)

Design: Plain Stock item - no branding

Package: Supplied bulk packed

Pricing: Refers to 1 single badge card holder

Availability: Made to Order, this item requires approx 3-5 working days production from point of order.

My Story: Made from clear rigid PVC (card holder) and nickel plated steel (clip and pin). PVC is 100% recyclable either by mechanical or chemical process and is widely accepted in recycling centres.

End of Life: These holders should be re-used for future events when ever this is possible, by simply printing new insert sheets for the new Delegate/Host names. If they do however reach end of usable life the clear badge holder is riveted to the metal clip and pin, so the user needs to separate these before placing into plastic and metal recycling.

Item: For printing the names of the speaker at an event to be displayed using the plastic Speaker card holder, supplied on A4 Sheet size, specifically for use on Local printers.

5 single Inserts (strips) per sheet, each sheet is perforated 4 time across horizontal to give 4 strips per sheet. Each strip is approx 59x210mm and fits into the Table/Speaker Card Holder.

To hold these inserts we supply the Speaker card holder, specifically sized for these inserts: Speaker card holder

Usage: For printing the names of the speaker at an event. Please Note: this item is the INSERTS only, you need to order the holders separately.

Size: 210mm x 295mm

Design: Printed WTW Ultraviolet block at the top of each strip + WTW in Ultraviolet bottom right corner of each strip

Package: Supplied as single sheet, bulk packed

Pricing: Refers to 1 single sheet (5 Speaker Card inserts)

Printing Template: This is available for download from this link: SpeakerCards-A4_v3.docx

If you are unable to see the Gridlines when viewing the templates in Microsoft Word then please refer to the following OS specific guides:

Windows: ViewGridlines-Windows.jpg

Mac OS: ViewGridlines-Mac.jpg

Availability: Made to Order, this item requires approx 10 working days production from point of order

My Story: Manufactured in the UK using FSC certified stock. Printed using vegetable based inks and with an uncoated finish (no laminate coating), these inserts are 100% recyclable. 

End of Life: These inserts can be placed into paper recycling schemes with no treatment or further action required by the user.

Item: Clear A-frame stand to hold the WTW Speaker Card Inserts at an event so that the speakers name can be displayed.

The Table/Speaker Card Holder can hold a single strip in a presentable manner, specifically sized to fit the printable inserts.

Please Note: this item is the HOLDER only, you need to order the inserts separately

Usage: These holders are specifically sized to hold the Speaker card insert, available here: Speaker card insert

Size: 210mm x 280mm x 5mm (folds out to stand upright)

Design: Plain Stock item - no branding

Package: Supplied bulk packed

Pricing: Refers to 1 single Speaker card holder

Availability: Current stock shown below, for higher volumes please contact us.

My Story: Made from clear rigid PVC. PVC is 100% recyclable either by mechanical or chemical process and is widely accepted in recycling centres.

End of Life: These holders should be re-used for future events when ever this is possible, by simply printing new insert sheets for the new event Speakers. If they do however reach end of usable life they can then be placed into plastic recycling.

Item: For printing guest names, for table/dinner settings, supplied on A4 Sheet size, specifically for use on Local printers.

Sheet is perforated once down & 4 times across to give 10x Cards, each H57 x W90mm and with fold SEAM across the middle.

Single sheet to go into laser printer and then tear off to create 10 Place Cards.

Usage: For printing guest names, for table/dinner settings.

Size: 295mm x 210mm

Design: WTW in Ultraviolet in bottom right corner (only)

Package: Supplied as single sheet, bulk packed

Pricing: Refers to 1 single sheet (10 Place names)

Printing Template: This is available for download from this link: DinnerCards-A4_v2.docx

If you are unable to see the Gridlines when viewing the templates in Microsoft Word then please refer to the following OS specific guides:

Windows: ViewGridlines-Windows.jpg

Mac OS: ViewGridlines-Mac.jpg

Availability: Made to Order, this item requires approx 10 working days production from point of order

My Story: Manufactured in the UK using FSC certified stock. Printed using vegetable based inks and with an uncoated finish (no laminate coating), these inserts are 100% recyclable. 

End of Life: These inserts can be placed into paper recycling schemes with no treatment or further action required by the user.

Item: 20mm wide smooth feel Eco Lanyard made from r-PET material (Recycled plastic bottles)

DyeSublimation printed lanyard with a smooth, flat texture in Black, White or WTW Ultraviolet

Please select your colour preference at point of order using the drop down menu below.

Smooth feel, with safety break and trigger clip as standard.

Size: 450/900mm x 20mm

Design: WTW logo repeated along length of lanyard

Package: Supplied bulk packed

Pricing: Refers to 1 single lanyard

Availability: Made to Order, this item requires approx 18 working days production from point of order.

My Story: Made from r-PET, which is Recycled PET (polyethylene terephthalate plastic). The recycled material (PET) is taken from plastic bottles reclaimed from landfill. This process allows a new material which can be created into a fabric, without exhausting natural resources

End of Life: Should the lanyard reach end of life or become damaged beyond usable condition, then material could be creatively repurposed or placed into a polyester recycling scheme. The Safety Break (PET) and Trigger Clip (Steel) could be separated from the fabric lanyard and also placed into plastic/metal recycling schemes. 

Item: Premium textured style 10mm wide Eco Lanyard made from r-PET material (Recycled plastic bottles)

Tubular Style lanyard with a soft texture in Pantone matched WTW Ultraviolet. 

Soft feel, with safety break and trigger clip as standard.

Size: 450/900mm x 10mm

Design: WTW logo in White along both sides

Package: Supplied bulk packed

Pricing: Refers to 1 single lanyard

Availability: Made to Order, this item requires approx 10 working days production from point of order.

My Story: Made from r-PET, which is Recycled PET (polyethylene terephthalate plastic). The recycled material (PET) is taken from plastic bottles reclaimed from landfill. This process allows a new material which can be created into a fabric, without exhausting natural resources

End of Life: Should the lanyard reach end of life or become damaged beyond usable condition, then material could be creatively repurposed or placed into a polyester recycling scheme. The Safety Break (PET) and Trigger Clip (Steel) could be separated from the fabric lanyard and also placed into plastic/metal recycling schemes. 

Item: Square White greeting card with the WTW logo printed to front. 

Inside is left blank for your own message OR can have a message printed onto all units - please confirm text required at point of order.

Printed on 350 gsm FSC uncoated card for a smudge-free finish.

Size: 148mm x 148mm

Design: WTW logo and graphic motif to front of card. Inside either blank or option to have your own message (printed text) from 25 units

Package: Supplied with White envelope

Pricing: Refers to 1 single Card and Envelope

Availability: Made to Order, this item requires approx 5-7 working days production from point of order.

My Story: Manufactured in the UK using FSC certified stock. Uncoated finish (no laminate coating) so these cards are 100% recyclable. 

End of Life: The card and envelope can be placed into paper recycling schemes with no treatment or further action required by the user.

A5 Notepad with 25 Pages per pad. Made from recycled paper and recycled card backing. Glued along top edge

Usage: General stationery use. These pads should not be used for event purposes. 

Size: 210mm x 148mm

Design: Printed WTW logo bottom right (Lines are also WTW Ultraviolet)

Package: Supplied bulk packed

Pricing: Refers to 1 single pad

Availability: Made to Order, this item requires approx 10-12 working days production from point of order.

My Story: Manufactured in the UK using recycled paper and card stock. Printed using vegetable based inks and with an uncoated finish (no laminate coating), these pads are 100% recyclable. 

End of Life: These pads can be placed into paper and card (the grey backing card) recycling schemes with no treatment or further action required by the user.

A5 Notepad with 50 Pages per pad. Made from recycled paper and recycled card backing. Glued along top edge

Usage: General stationery use. These pads should not be used for event purposes. 

Size: 210mm x 148mm

Design: Printed WTW logo bottom right (Lines are also WTW Ultraviolet)

Package: Supplied bulk packed

Pricing: Refers to 1 single pad

Availability: Made to Order, this item requires approx 10 working days production from point of order.

My Story: Manufactured in the UK using recycled paper and card stock. Printed using vegetable based inks and with an uncoated finish (no laminate coating), these pads are 100% recyclable. 

End of Life: These pads can be placed into paper and card (the grey backing card) recycling schemes with no treatment or further action required by the user.

A4 Notepad with 25 Pages per pad. Made from recycled paper and recycled card backing. Glued along top edge

Usage: General stationery use. These pads should not be used for event purposes. 

Size: 297mm x 210mm

Design: Printed WTW logo bottom right (Lines are also WTW Ultraviolet)

Package: Supplied bulk packed

Pricing: Refers to 1 single pad

Availability: Made to Order, this item requires approx 10-12 working days production from point of order.

My Story: Manufactured in the UK using recycled paper and card stock. Printed using vegetable based inks and with an uncoated finish (no laminate coating), these pads are 100% recyclable. 

End of Life: These pads can be placed into paper and card (the grey backing card) recycling schemes with no treatment or further action required by the user.

A4 Notepad with 50 Pages per pad. Made from recycled paper and recycled card backing. Glued along top edge

Usage: General stationery use. These pads should not be used for event purposes. 

Size: 297mm x 210mm

Design: Printed WTW logo bottom right (Lines are also WTW Ultraviolet)

Package: Supplied bulk packed

Pricing: Refers to 1 single pad

Availability: Made to Order, this item requires approx 10-12 working days production from point of order.

My Story: Manufactured in the UK using recycled paper and card stock. Printed using vegetable based inks and with an uncoated finish (no laminate coating), these pads are 100% recyclable. 

End of Life: These pads can be placed into paper and card (the grey backing card) recycling schemes with no treatment or further action required by the user.

Item: Exhibition Tablecloth made from heavyweight, easy-care fabric. 

Overlocked and hemmed edges, supplied with 2 Clips to secure the tablecloth to each side of the table.

Fabric is Fire Rated to DIN4102 - B1

Suitable to cover a common 6ft exhibition table to the floor on one side (front) with part fall at the rear and both sides.

Size: 1780mm x 2750mm (6 feet x 9 feet)

Design: Material flooded in WTW Dark Ultraviolet, with WTW Logo in WTW Ultraviolet to the front fall

Care Guidance: This cloth is specifically made using an easy-care fabric, in that most spills can be wiped off, and so long as the cloth is folded when not in use (not scrunched) it should remain smooth and free of creases. The fabric is machine washable if needed, at 30 degrees. Use minimal detergent - ideally hand wash if possible. Do not tumble dry but it can be ironed on a low heat to the reverse of the printed side only. 

Package: Supplied bulk packed (folded)

Pricing: Refers to one single cloth + 2 clips

Availability: Made to Order, this item requires approx 10 working days production from point of order

My Story: Made from Display rated Polyester and printed with water based inks. 

End of Life: The material is recyclable so could be either creatively repurposed (large paint matt, or temporary seat cover) or placed into clothing/fabric recycling services.